Roland RD-800 User Manual

USING THE UNIT SAFELY
To completely turn o power to the unit, pull out
the plug from the outlet
Even with the [ ] switch turned o,
this unit is not completely
separated from its main source of
power. When the power needs to be
completely turned o, turn o the [ ] switch
on the unit, then pull out the plug from the
outlet. For this reason, the outlet into which
you choose to connect the power cord’s plug
should be one that is within easy reach and
readily accessible.
Concerning the Auto O function
The power to this unit will be
turned o automatically after a
predetermined amount of time has
passed since it was last used for
playing music, or its buttons or controls were
operated (Auto O function). If you do not
want the power to be turned o
automatically, disengage the Auto O
function (p. 27).
Do not disassemble or modify by yourself
Do not carry out anything unless
you are instructed to do so in the
owner’s manual. Otherwise, you risk
causing malfunction.
Do not repair or replace parts by yourself
Refer all servicing to your retailer,
the nearest Roland Service Center,
or an authorized Roland distributor,
as listed on the “Information.”
Do not use or store in the following types of
locations
• Subject to temperature extremes
(e.g., direct sunlight in an
enclosed vehicle, near a heating
duct, on top of heat-generating
equipment); or are
• Damp (e.g., baths, washrooms, on
wet oors); or are
• Exposed to steam or smoke; or are
• Subject to salt exposure; or are
• Exposed to rain; or are
• Dusty or sandy; or are
• Subject to high levels of vibration and
shakiness.
Use only the stand that is recommended
This unit should be used only with a
stand that is recommended by
Roland.
Do not place in a location that is unstable
When using the unit with a stand
recommended by Roland, the stand
must be carefully placed so it is level
and sure to remain stable. If not
using a stand, you still need to make sure that
any location you choose for placing the unit
provides a level surface that will properly
support the unit, and keep it from wobbling.
Precautions regarding placement of this unit on
a stand
Be sure to follow the instructions in
the Owner’s Manual carefully when
placing this unit on a stand (p. 8).
If it is not set up properly, you risk
creating an unstable situation which could
lead to the unit falling or the stand toppling,
and may result in injury.
Connect the power cord to an outlet of the
correct voltage
The unit should be connected to a
power supply only of the type
described as marked on the rear
side of unit.
Use only the supplied power cord
Use only the attached power cord.
Also, the supplied power cord must
not be used with any other device.
Do not bend the power cord or place heavy
objects on it
Otherwise, re or electric shock may
result.
Avoid extended use at high volume
Use of the unit at high volume for
extended periods of time may cause
hearing loss. If you ever experience
any hearing loss or ringing in the
ears, you should immediately stop using the
unit and consult a specialized physician.
Do not allow foreign objects or liquids to enter
unit; never place containers with liquid on unit
Do not place containers containing
liquid (e.g., ower vases) on this
product. Never allow foreign objects
(e.g., ammable objects, coins,
wires) or liquids (e.g., water or juice)
to enter this product. Doing so may
cause short circuits, faulty
operation, or other malfunctions.
Used for instructions intended to alert the
user to the risk of injury or material
damage should the unit be used
improperly.
* Material damage refers to damage or
other adverse effects caused with
respect to the home and all its
furnishings, as well to domestic animals
or pets.
Used for instructions intended to alert the
user to the risk of death or severe injury
should the unit be used improperly.
The symbol alerts the user to things that must be
carried out. The specific thing that must be done is
indicated by the design contained within the circle. In the
case of the symbol at left, it means that the power-cord
plug must be unplugged from the outlet.
The symbol alerts the user to important instructions or
warnings. The specific meaning of the symbol is
determined by the design contained within the triangle. In
the case of the symbol at left, it is used for general
cautions, warnings, or alerts to danger.
The symbol alerts the user to items that must never be
carried out (are forbidden). The specific thing that must
not be done is indicated by the design contained within
the circle. In the case of the symbol at left, it means that
the unit must never be disassembled.
About WARNING and CAUTION Notices
About the Symbols
ALWAYS OBSERVE THE FOLLOWING
WARNING WARNING WARNING
3

Roland RD-800 Specifications

General

Brand	Roland
Model	RD-800
Category	Synthesizer
Language	English