■ Part parameters for sound editing
On this unit, you can modify the values of a variety of parameters in order to create
the sound most suitable for your playing. A “parameter” is something that affects the
sound. The process of modifying parameter values is called “editing.” Sound parameters
affect the volume, timbre and pitch of the sound.
You can set the following parameters.
Vibrato : Rate Depth Delay
Filter : Cutoff Frequency Resonance
Envelope : Attack Time Decay Time Release Time
● Procedure
1. Make sure that the [ALL] indicator is dark.
If it is lit, press the [ALL] button to turn it off.
2. Use the PART [ll
ll
] [rr
rr
] buttons to select a Part.
3. Press the [SELECT] button to select the parameter (vibrato, filter, enve-
lope) you wish to edit, and use the corresponding set of [ll
ll
] [rr
rr
] buttons
to modify the value.
4. Simultaneously pressing both [ll
ll
] [rr
rr
] buttons used to set Vibrato, Filter
or Envelope will cause the setting status of that parameter to appear
graphically in the display.
Simultaneously press both buttons again, and the previous display will reappear.
To Next Page
Loading...
Need help?
Sound Specifications
Display
Power
Weight and Dimensions
