■
Saving a Drum Set you created (User Drum)
You can modify drum instrument parameters to your liking, and save this data as a
Drum Set. A Drum Set saved in this way is called a User Drum Set. You can save up to
two Drum Sets, and since each set contains 128 instrumental sounds, this provides a
total of 256 instrumental sounds (Drum Instruments). You can also give each User Drum
Set a name of your choice. User Drum Sets are stored in Drum Set numbers 65 and 66
of the Native map / SC-88 map (p.104).
* The same contents are stored in both the SC-88 and Native maps.
● Naming a User Drum Set
1. Make sure that the [ALL] indicator is dark.
If it is lit, press [ALL] to turn it off.
2. Use PART [
ll
ll
] [
rr
rr
] to select a Drum Part, simultaneously press PAN [rr
rr
]
and CHORUS [rr
rr
].
The character at the cursor location will blink.
3. U
se PART [ll
ll
] [rr
rr
] to move the cursor where you wish to input a character.
The blinking area will move.
4. Use INSTRUMENT [ll
ll
] [rr
rr
] to select the desired character.
Then repeat from step 3.
Each time you press [ALL], the character will change A → a → A → a.
Pressing [MUTE] will enter a space.
Pressing [SC-55 MAP] will select 0.
Each time you press [SC-88 MAP], the symbol will change & → ( → & → (.
If you wish to change the User Drum Set number, simultaneously press both INSTRU-
MENT [l] and[r] buttons, and then use INSTRUMENT [l] [r] to select the number.
However, be aware that if you change the number, the parameter settings will also
change.
5. Simultaneously press PAN
[rr
rr
]
and CHORUS
[rr
rr
]
to end the procedure.
* To store the name of the User Drum Set in memory, follow the steps explained in “Storing an
entire Drum Set (procedure 2)” on p.103, 105.
To Next Page
Loading...
Need help?
Sound Specifications
Display
Power
Weight and Dimensions
