■ System Effect settings
The System effects of this unit include 8 types of reverb and chorus, and 10 types of
delay. In addition, for each of these effects you can specify parameter values such as
character, depth, rate and time. Reverb is an effect that adds reverberation to a sound,
as you would hear in a concert hall. Chorus broadens the spatial image of the sound,
adding depth and richness. Delay creates echoes. It is also possible to give depth and
width to a sound by adding a short delay to the original sound. For these effects, you
can set the overall level for all Parts and also individual levels for each Part.
This unit has a two-band equalizer (high range, low range). An equalizer lets you
boost or cut specified frequency ranges of a sound to adjust the tone. For each range,
high and low, you can specify the frequency and the amount of boost or cut (gain).
● Equalizer setting procedure
* The equalizer cannot be used when Double Module Mode (p.116) is selected.
* The equalizer can be turned on/off for individual Parts. (p.27)
1. Press [ALL] to make the button indicator light.
2. Press [SELECT] to display the equalizer setting.
3. Press the EFX TYPE [ll
ll
] [rr
rr
] buttons to select gain or frequency setting
display.
To Next Page
Loading...
Need help?
Sound Specifications
Display
Power
Weight and Dimensions
