Saving your changes
V-Accordion
r
45
Saving your changes
1.
Press and hold the [SET] register until the
display looks as follows:
2.
Press register [2] (VALUE ®) to save your
settings.
The display now looks as follows:
If you don’t want to save your changes, press [1]
(√ VALUE). The display briefly shows the “no” mes-
sage.
3.
Press the [USER PROGRAM] (ENTER) button
to confirm your intention.
The settings are stored internally and the display
briefly shows the “y.E.S.” message (the three dots
flash), then “don” when the settings are stored.
Next, the display returns to the master page.
PARAM LIST parameters
Audio file name
This parameter allows you to select the
audio file you want to play back. See
“Selecting audio files” on p. 33.
NOTE
You can only select audio files in the USB memory’s root
directory. Audio files inside folders are not detected.
Audio Level
This parameter allows you to set the vol-
ume level of the selected audio file. See
“Adjusting the playback level” on p. 34.
Treble/Bass&Chord Balance
This parameter allows you to adjust the
volume balance between the bass/chord
and treble sections. Any setting with a
“b” means that the bass & chord section is louder than
the treble section (“t”).
Musette Detune
This parameter allows you to choose the
detuning preset. See “Musette Detune”
on p. 35 for details. You can select one
of the following detuning presets:
The deafult setting is “2”. If the “oFF” message is dis-
played, the selected register cannot be detuned.
NOTE
Musette Detune only affects registers that use more than one
8’ reed.
Master Tune
This parameter allows you to change the
FR-1x’s overall tuning, which may be
necessary when you play with acoustic
instruments that cannot be tuned easily. The factory
default is 440.0Hz.
NOTE
The display only shows the last three digits. The setting
“464.3” is therefore displayed as “64.3”.
Transpose
This parameter allows you to transpose
all sections of the FR-1x. See “Changing
the key of the keyboard (transpose)” on
p. 35.
Value (file name, 3 characters)
Default setting: —
Value Off, 1~10
Default setting: 8
Urt
YES
AUd
AUl
Value b64~b1,Cen, t1~t63
Default setting: t15
Value Setting Value Setting
0 No detune 8 D-Folk L
1 Dry 9 Italian L
2 Classic 10 German H
3 F-Folk 11 Alpine
4 American L 12 Italian H
5 American_H 13 D-Folk H
6 North Eur 14 French
7 German L 15 Scottish
Value 15.7~64.3 (415.7~464.3Hz)
Default setting: 40.0 (440.0Hz)
Value –6~0~+5
Default setting: 0
bal
det
tUn
trP
FR-1x GB.book Page 45 Tuesday, November 8, 2011 11:44 AM
To Next Page
Loading...
Need help?
General
