Error messages
68
r
FR-1x V-Accordion
17. Error messages
The FR-1x may display one of the following messages to signal that it has detected an error. In that case, please read the
following and take the appropriate action.
Message Meaning Action
E01 The FR-1x already contains these sounds
The sound set you wanted to load already resides in the
FR-1x’s internal memory. See “Loading new sounds from a
USB memory (optional)” on p. 42.
E02 Missing sound
The User Set (1~4) you recalled requires a sound that the
FR-1x no longer contains.
E03 File format error The file you want to load appears to be corrupt.
E04 USB read/write error
1) The USB memory is full. Use a different USB memory or
delete files you no longer need.
2) You removed the USB memory while the FR-1x was
accessing it. Connect it to the FR-1x’s USB port.
3) The USB memory you connected is not properly formatted
or not compatible.
4) The data could not be written to the USB memory or the
file you selected cannot be read.
E05 Write protected
The USB memory you connected is write protected. See the
manual that came with the storage device for how to disable
its protection.
E06 Invalid mp3 or WAV file
The FR-1x doesn’t recognize the selected audio file. See
“About audio files” on p. 32 for the supported file types.
E07 Internal error
The last operation failed. Please perform it again. If the error
persists, please contact your Roland dealer or Roland distrib-
utor (see “Information” on page 75).
FR-1x GB.book Page 68 Tuesday, November 8, 2011 11:44 AM
To Next Page
Loading...
Need help?
General
