Restoring the factory defaults
64
r
FR-1x V-Accordion
15. Restoring the factory defaults
You can reset the FR-1x to its factory settings, which means that your own Global settings are replaced by the settings
the FR-1x contained when you first got it. You may wish to archive your settings before initializing the FR-1x (see “Sav-
ing User Program memories to USB memory (optional)” on p. 40).
Loading all factory settings
1.
Switch on the FR-1x while holding down the
treble registers [3] and [4].
The display changes to:
When all settings have been initialized, the display
briefly shows the following message:
2.
Switch off the FR-1x, then switch it back on
again.
The FR-1x now again sounds and behaves like when
you first bought it.
Restoring the User Sets to their
factory defaults
This function allows you to restore the factory settings
of one of the four User Set memories (see also
page 24).
1.
Press and hold down the [SET] register.
The display shows the name of the last parameter
you selected.
2.
Use treble register [3] or [4] (PARAM LIST)
to select “UrC”.
FCt
don
PIANO/GUITAR
WIND
UrC
FR-1x GB.book Page 64 Tuesday, November 8, 2011 11:44 AM
To Next Page
Loading...
Need help?
General
