182
Sample Mode
You can specify a region of the sample, and edit the region by cutting or copying.
Basic Operation
1.
Access the Sample Edit screen (p. 178).
2.
Specify the region that you want to edit (Edit Start–Edit End), or the Current location (p. 179).
3.
Touch <MENU> in the upper right of the screen.
A pulldown menu appears.
fig.04-16_50
4.
In the pulldown menu, touch the editing function that you want to execute.
A window appears, asking you to confirm the operation.
fig.04-17_50
Some editing functions require you to input a numerical value. For details, refer to the following explanations of each
editing function.
5.
Touch <EXECUTE> to execute the editing function.
• If you want to cancel without executing, touch <Cancel>.
• By touching “Undo” in the pulldown menu, you can return to the state prior to executing the
operation (Undo). Depending on the type of edit function you execute, or on the state of the work
area, there may be cases in which the Undo function cannot be executed. In such cases, you will
not be able to select <Undo>.
6.
If you want to save the edited result, perform the Save operation (p. 191).
Editing the Specified Region of the Sample
V-Synth-GT_e.book 182 ページ ２００７年４月９日 月曜日 午後１時４６分
To Next Page
Loading...
Need help?
General
