Roland V-Synth GT User Manual

50
Patch Mode (Playing in Patch Mode)
You can turn the ASSIGNABLE CONTROL knobs to modify the sound in real time.
The assignable controllers use matrix control to apply effects to the sound. This means that you will need to make matrix
control settings separately. Set the matrix control Source to “KNOB1” or “KNOB2,” and specify the parameter to be
controlled in Destination. For details on this setting, refer to “Matrix Control” (p. 91).
1.
Press [PATCH] to access the Patch Play screen.
2.
Press [ASSIGNABLE].
If you press [LEVEL] or [PAN], the knobs will adjust the level or pan of the upper and lower tones.
3.
While playing the keyboard to produce sound, turn the ASSIGNABLE CONTROL knobs ([C1], [C2]).
The sound will change according to the function assigned to each knob.
fig.04-21.eps
By assigning MIDI controller numbers to the assignable controllers, you can turn [C1] or [C2] to control an external
MIDI device that is connected. For details, refer to “C1/C2 Knob” (p. 206).
Using the Assignable Controllers
V-Synth-GT_e.book 50 ページ ２００７年４月９日 月曜日 午後１時４６分

Roland V-Synth GT Specifications

General

Brand	Roland
Model	V-Synth GT
Category	Synthesizer
Language	English