39
Patch Mode (Playing in Patch Mode)
When you press [PATCH], you’ll be in Patch mode, and the Patch Play screen will appear.
fig.04-01-j.eps
A patch consists of two tones, and you can use the following portions of the screen to control each tone.
fig.04-02-j.eps
About the Patch Play Screen
Lists the patches.
Opens the Patch menu.
Indicates the category of the patch.
Indicates/specifies
the number and name
of the selected patch.
Opens the Help screen.
Opens the V-Synth GT Map screen.
Indicates/specifies the tempo.
Shows information about
the upper tone used
by the selected patch.
Shows information about
the lower tone used
by the selected patch.
Shows the parameters assigned
to the E1–E8 knobs, and their values.
Opens the Arpeggio setting screen (p. 69).
Turns the upper tone on/off.Turns the lower tone on/off.
Use the C1 or C2 knob to adjust
the level.
Indicates the tone number, name,
and category.
Indicates the name of the structure.
Touch this to open the structure
setting screen.
Opens the Multi Step Modulator screen (p. 142).
Opens the Pro Edit screen (p. 85).
Opens the Sound Shaper II screen (p. 158).
Opens the tone list.
V-Synth-GT_e.book 39 ページ ２００７年４月９日 月曜日 午後１時４６分
To Next Page
Loading...
Need help?
General
