Royal Enfield Bullet 350 User Manual

19
RUNNING IN PERIOD
The Royal Enfield Motorcyc le as you would be
experiencing, is capable of consistent high speeds.
However as with any new motorcycle, a “RUNNING-
IN” procedure is essential to help in proper “Bedding-
In” of the various moving parts in your motorcycle and
to achieve optimum performance subsequently.
1. During the first 2000 Kms of run, do not exceed the
speed limits as shown in the table below.
2. Do not exceed maximum specified pay load.
3. Warm up the engine for a few minutes at idling
speed to allow engine oil to lubricate all the
moving parts in the engine before riding the
motorcycle.
4. Avoid full throttle operation and do not ride at
constant throttle continuously. Vary the speed by
10% while riding.
5. Avoid sudden accelerations and racing starts.
Motorcycle
Speed
Gear
First 500 kms. 501 - 2000 kms.
1 15 KMPH 20 KMPH
2 25 KMPH 30 KMPH
3 30 KMPH 40 KMPH
4 45 KMPH 55 KMPH
5 60 KMPH 70 KMPH

Royal Enfield Bullet 350 Specifications

General

Engine Type	Single Cylinder, 4 Stroke, Air Cooled
Displacement	346 cc
Max Power	19.1 bhp @ 5250 rpm
Max Torque	28 Nm @ 4000 rpm
Transmission	5 Speed Constant Mesh
Fuel Capacity	13.5 Liters
Brakes Rear	153 mm Drum
Tyre Size Front	3.25 x 19
Tyre Size Rear	3.25 x 19
Seat Height	800 mm
Ground Clearance	135 mm
Wheelbase	1370 mm
Brakes Front	280 mm disc
Fuel System	Fuel Injection