Royal Enfield Bullet 350 User Manual

21
 To shift to 2
nd
and higher gears
close throttle, depress clutch lever
and press the gear pedal with heel.
 Turn the ignition switch
to ‘OFF’ position.
 Turn fuel tap ‘OFF’
To stop the motorcycle, close
throttle, apply front and rear
br akes. Simultaneously, shift
gears into neutral just before the
motorcycle comes to a complete
stop.
 Warm up engine for 2 minutes.
 Depress clutch lever.
 Pr ess gear pedal with toe to
engage 1
st
gear.
 Gently open throttle and release
clutch lever simultaneously. If
clutch is released suddenly, the
engine may stall and cause the
motorcycle to move with a jerk.
GEAR SHIFTING, RIDING & STOPPING
NOTE
 Release the Starter button as soon as the Engine starts.
 If Engine does not start, wait for 30 seconds before
pressing the starter switch.
 A Clutch switch is provided in the system for the safety
of the rider. When the motorcycle is in gear, the
motorcycle cannot be started. To start in gear
depress the clutch lever and press Starter button to
start engine.

Royal Enfield Bullet 350 Specifications

General

Engine Type	Single Cylinder, 4 Stroke, Air Cooled
Displacement	346 cc
Max Power	19.1 bhp @ 5250 rpm
Max Torque	28 Nm @ 4000 rpm
Transmission	5 Speed Constant Mesh
Fuel Capacity	13.5 Liters
Brakes Rear	153 mm Drum
Tyre Size Front	3.25 x 19
Tyre Size Rear	3.25 x 19
Seat Height	800 mm
Ground Clearance	135 mm
Wheelbase	1370 mm
Brakes Front	280 mm disc
Fuel System	Fuel Injection