Royal Enfield Bullet 350 User Manual

35
FUSE & CARRIER BULLET 350/BULLET 350-ES
MINOR MAINTENANCE TIPS
TAIL LAMP BULB
 Remove the tail lamp cover
screws and cover.
 Press bulb gently and turn
anticlockwise to pull out the bulb.
 Replace bulb and assemble in the
reverse order.
TRAFFICATOR BULB
 Remove the screws & take out
trafficator glass cover.
 Press bulb gently & Turn anti-
clockwise to take out the bulb.
 Posi tion the new bulb inside
holder, ensuring that the pins in
the bulb, match with the slots in the holder.
 Gently press the bulb and turn clockwise to lock
the bulb in the holder.
 Refit the trafficator glass and screws, ensuring the
lens slot / cut mark is at the bottom.
 Open the left side Electrical box.
 The tail light fuse carrier is
located on the main wiring
harness (10 amps glass tubular
fuse).
 The blade fuses are located in
the carrier and differently
coloured for identification.

Royal Enfield Bullet 350 Specifications

General

Engine Type	Single Cylinder, 4 Stroke, Air Cooled
Displacement	346 cc
Max Power	19.1 bhp @ 5250 rpm
Max Torque	28 Nm @ 4000 rpm
Transmission	5 Speed Constant Mesh
Fuel Capacity	13.5 Liters
Brakes Rear	153 mm Drum
Tyre Size Front	3.25 x 19
Tyre Size Rear	3.25 x 19
Seat Height	800 mm
Ground Clearance	135 mm
Wheelbase	1370 mm
Brakes Front	280 mm disc
Fuel System	Fuel Injection