System and Support
You can system and support settings, such as clock, timers, energy usage and software updates.
Using the Time Functions and the Timers
Set the current time and use the timer function.
(left directional button) Settings All Settings General & Privacy System
Manager Time Try Now
You can set the Clock manually or automatically. Once the Clock is set, you can view the current time on the TV
anytime.
You must set the clock in the following cases:
• The power cord is disconnected and then connected.
• The Clock Mode is changed from Auto to Manual.
• The TV is not connected to the network.
• No broadcast signals are received.
Setting the clock automatically
(left directional button) Settings All Settings General & Privacy System
Manager Time Clock Clock Mode Auto
This function works only when the TV is connected to the network or is receiving digital broadcasts through a connected
antenna.
The accuracy of the time information received may differ with the channel and signal.
If you get your TV signal from a cable broadcast receiver/set-top box or a satellite receiver/satellite set-top box connected
to an HDMI or Component port, you must set the current time manually.
- 140 -
To Next Page
Loading...
Need help?
General
