Connecting to the network
You can get access to the network through your TV.
(left directional button) Settings All Settings Connection Network Open
Network Settings Try Now
network settings to connect to an available network.
Establishing a wired network connection
(left directional button) Settings All Settings Connection Network Open
Network Settings Wired
If you connect a LAN cable, the TV automatically accesses the network.
If the TV does not automatically connect to the network, refer to "Wired network connection failed." in "Troubleshooting."
To connect a LAN cable, use a CAT 7 (*STP type) cable for the connection. (100/10 Mbps)
* Shielded Twisted Pair
The TV will not be able to connect to the network if your network speed is below 10 Mbps.
This function may not be supported depending on the model.
Wired networks are not supported by some models.
- 8 -
To Next Page
Loading...
Need help?
General
