System Management 107
Using the Battery
Please refer to the following instructions when running the computer on battery power
without connecting the AC power.
Precautions
• Use only chargers specified in the User Manual.
• Never heat the battery pack, put it near or in a fire or use at a temperature
higher than 60°C, as this may cause fire.
• Never cause a short circuit between the battery pack terminals or
disassemble the battery pack.
• Carefully read and follow the precautions printed on the battery and the
safety instructions in the User Manual before using the battery.
Please read the instructions on the battery before use.
Please refer to the system operation environment (p153) of this manual and
operate and store the battery at room temperature.
Ejecting and Attaching Battery
1. Shutdown the system and close LCD.
2. Put the computer upside down on a flat surface.
3. Pull the two battery latches outward.( ), then remove the battery.
To Next Page
Loading...
Need help?
General