To Next Page

To Previous Page

Adjusting the amount of ﬂash light

When setting a ﬂ ash option, you can adjust the

brightness of the ﬂash.

In the Shooting mode, press [MENU].

Select Shooting 2 (

) → Flash.

Press the [Fn] button after selecting a

desired item.

Adjust the brightness of the ﬂ ash by

rotating the dial or pressing [W / X].

• You can adjust ﬂ ash brightness by ±2

levels.

Taking a picture in a dark place

• If the subject is too close, the ISO sensitivity is

high, or the exposure value is too large or small,

the adjustment effect will be reduced.

• The Flash Brightness Adjustment function is not

available in some shooting modes.

• If an external ﬂ ash unit has a ﬂash control

function, the light control value of the external

ﬂash is applied when you connect it to the

camera.

• If the distance from the subject is quite close

when taking images by using the built-in ﬂash,

part of the images may appear dark as the lens

is interfered with the ﬂash light. Please check

the distance between camera and subject when

taking pictures. The distance interfered with

ﬂash light may vary by the type of lens in use.

• If you've installed a lens hood, the hood can

block light from the built-in ﬂash. Please remove

the lens hood when using the built-in ﬂash.

Flash Exposure Value

ResetBack

Display

the level of

ﬂash light

adjustment

Samsung NX5 User Manual

Questions and Answers: