Bluetooth
Section 2K. Bluetooth 121
Pairing Bluetooth Devices
The Bluetooth pairing process allows you to establish
trusted connections between your phone and another
Bluetooth device. When devices are paired, a passkey
is shared between devices, allowing for fast, secure
connections while bypassing the discovery and
authentication process.
To pair your phone with a Bluetooth device:
1. While in standby mode, select Main Menu > Tools >
Bluetooth.
2. Press Add New (left softkey) > Search. (Your phone
will display a list of discovered in-range Bluetooth
devices.)
3. Select the device you wish to pair with and press
Add to list (left softkey).
4. Enter the numeric passkey and press . You are
then notified that Pairing is in progress.
5. Enter a new Device Name for the device and press
Done (left softkey) to save and exit.
6. Highlight the device and press Connect (left
softkey). (
Connection Successful is displayed if the
device is communicating properly.)
Waiting for Pairing
If you are going to be using a Dial-Up Network (DUN)
profile to pair with a computer or PDA, you will need to
allow the other device to initiate pairing with your
phone.
1. While in standby mode, select Main Menu > Tools >
Bluetooth.
2. Press Add New (left softkey) > Wait for request.
3. The visibility pop-up screen is displayed.
4. Follow the onscreen prompts to enter your passkey
and press .
M520_Sprint.book Page 121 Thursday, September 18, 2008 12:34 PM
To Next Page
Loading...
Need help?
General
