TV SETTING
Auto Channel Search is performed automatically when TV is first powered on or after resetting.
Note: Be sure to select the proper input source (ATV/DTV) before tuning operation.
AUTO TUNING
You should perform an auto channel search to search for all channels available and store them in memory.
Press ◄or►button to select TV SETTING menu. Press
▼ button to access the menu. Auto Tuning item will be
highlighted, and press
►or OK button to access.
2
1
Press MENU button and the main menu screen will be
displayed.
Now a confirmation box appears on the screen as Picture
1. Press ◄or►button to select Yes, and then press OK
button to start Auto Tuning. ATV search firstly, then DTV
and Radio, shown as Picture 2.
3
During tuning, press Back button to skip the current tuning
and start another one. Or press MENU button to exit the
tuning. As Pictures 3 and 4 shown, you can press
◄or►
button to select Yes and then press OK button to access
the operation.
4
Picture 1
Picture 2
Picture 3
Picture 4
Picture 5
After Auto Tuning, the LCD TV will memorize all ATV/DTV
channels available. The Saving display will be shown on
the screen like Picture 5 for 5 seconds. And then the first
position in the programme list will be on.
5
Picture 6
Note:
●
At the first power
on and just after plug and play channel
set-up, o
perating mode selection menu will appear,
shown
as picture 6
. Press
◄or►
button to
select and press OK
button for Standard/Energy Save or Store/Dynamic.
Then the pop up menu disappears.
●
Recommending Standard/Energy Save mode for normal
home viewing.
●
The password for Block Programme will be cleared after
auto tuning.
To Next Page
Loading...
Need help?
General
