DEALER MODE
The Dealer Mode has 11 different modes: VOLUME LOCK,
TUNING LOCK, START MODE, OSD, RC, AC POWER, MUSIC
MODE, NO SIGNAL OFF, PC CONTROL, BAUD RATE and
RESET.
TO DISPLAY DEALER MODE:
Press and hold Menu button on Side Control, and then press
INFO button on remote control to display Dealer mode menu.
DEALER MODE
Press ▲, ▼,◄or►buttontonavigatethroughtheoptions
and adjust the options.
Press and hold Menu button on Side Control, and press
INFO button on remote control to display Dealer mode
menu.
Press menu button to exit menu operation.
1
2
3
Option Description
VOLUME LOCK
To limit the maximal volume. It's necessary to set up the maximum
volume before VOLUME LOCK ON.
The way to prevent user from executing the Tuning function.
TUNING LOCK
The LCD TV will automatically enter to the setting mode while being
turned on. You can select OFF, DTV, ATV, AV1(AV1-S), AV2(AV2-DVD),
HDMI-1, HDMI-2, HDMI-3, PC in START MODE. When it is set "OFF", it
will keep the mode before being turning off.
START MODE
When it is set OFF, corresponding OSD cannot display on the screen
while operating.
OSD
You can set "NORMAL", "PROHIBIT" or "SEPARATE" in RC MODE.
Use this feature to set Remote Control mode including Power ON/OFF
function.
NORMAL
● Set Remote Control to normal function.
PROHIBIT
●
When RC is disabled, only Side-panel button can be used.
SEPARATE
●
POWER button still can be functioned to Power ON/OFF.
● FAV ▼button
to Power OFF in all modes including Teletext mode.
● FAV ▲
button to Power ON in all mode including Teletext mode.
RC
AC POWER MODE
You can set "STAND", "LAST" or "ON" in AC POWER MODE.
Use this feature to set TV condition when AC power cord is plug-in.
ON
● When AC power cord is plug-in, LCD TV is always ON.
STANDBY
●
When AC power cord is plug-in, LCD TV is always STAND-BY.
LAST
● When AC
power cord is plug-in
, the LCD TV will be operated
depending on last TV condition. (ON or Stand-by)
To Next Page
Loading...
Need help?
General
