TIME MENU
ON TIMER SETUP
Press ▲ or ▼button to select On Timeritem,press►orOK
button to access the submenu.
2
1
Navigate to the Time menu, press ▼button to access.
Now the Active item will be highlighted automatically, shown
as right picture.
Press◄or►buttontoselectOff, Once,
Everyday, Mon-Fri, Mon-Sat, Sat-Sun or Sun.
3
When finished, use ▲ or ▼button to select Close and press OK button to confirm the setting.
6
With On Timer has been set, the LCD TV will automatically turn on at
the preset time.
Note:
● While AC Power off, the setting will be removed, except for DTV mode.
● While On Timer is set, the Timer indicator will be light in Stand-by status.
● On Timer setting will be removed while AC Power off.
●
If Off Timer and On Timer are set as the same time, the Off Timer setting is availabe while the LCD TV is
On, and On Timer setting is available when the LCD TV is off.
● After On Timer is executed, if no operation in 2 hours, the LCD TV will be off automatically.
Option Description
Volume
Sets desired voume for the On programme.
Selects one source to be viewed through On timer.
Mode
Selects a broadcasting program for On timer.
Program
Press ▲ or ▼button to select Hour or Minuteitem,press◄
or►buttontoadjustthevalue.
4
After setting On Timer, you can press ▲, ▼,◄or►button
to navigate through the following three options and adjust the
options.
5
Press POWER ON/OFF button to swith the LCD TV to standby mode. At the preset time, the LCD TV
will automatically turn on and broadcast the preset program at the preset volume.
7
To Next Page
Loading...
Need help?
General
