www.schaerer.com Operation
BASCAP_TOUCHIT_EN
V04 | 10.2018
36
Beverage selection with groups
The following beverage selection variants are listed in the [Group selection] selection list:
• [None (all beverages on one page)]
• [Options before beverage selection]
• [Options after beverage selection]
• [Beverage groups]
Beverage groups
The [Beverage page and groups] selection is only available in [Barista Silver mode].
• 1) Selection of group and from the beverages stored in the group.
• 2) Optional when with flavour [Selection]
• 3) Beverage dispensing
Dispensing in-
formation
The flashing symbol at the bottom of the touch screen appears while a be-
verage is being dispensed in "Operator" and "Self-service" mode.
Dispensing in-
formation
Barista Silver
The displayed window, with integrated display of dispensing duration, ap-
pears during beverage dispensing in the "Barista Silver" mode.
If the "General pre-selection" parameter is active in the "Configuration" -
"General parameters" menu, only the "Stop" symbol appears during bever-
age dispensing.
See also "Configuration" - "View set-up" - "Beverage cancel field visible".
Symbol Description
Settings can only be changed by a service technician.
The additional [DECAF], [Barista] and [Double products (2x)] functions can be set in the "Con-
figuration" menu in the "Screen layout" sub-menu.
If not pre-selection option has been selected, 12 beverages can be displayed for each group.
(Not possible when [Beverage groups] is selected)
The additional [DECAF] and [Double beverage (2x)] functions can be set in the "Configuration"
menu in the "Screen layout" sub-menu in accordance with the selected operating mode.
To Next Page
Loading...
Need help?
General
