BASCAP_TOUCHIT_EN
V04 | 10.2018
79
www.schaerer.comProgramming
System settings
805) Flavour The settings in this parameter determine
when and whether a flavour is to be added to
the beverage.
If set to [No Flavour]:
► Select [No Flavour].
Beverage is dispensed without a fla-
vour.
If set to [Select a flavour variety]:
► Select [desired flavour].
Beverage is dispensed with a flavour.
If set to [Selection]:
► Select [Selection].
When selecting a beverage, the fla-
vour is selected immediately before
the beverage is dispensed.
No flavour / All
available fla-
vour varieties /
Selection
The "Flavour mode" sy-
stem parameter is activa-
ted.
The quantities are dosed
based on the "Flavour 1 - 4
dosing time" parameters.
Parameters: Flavour settings
Display text Description Setting range Notes
Parameters: Date / Time / Alarm
Display text Description Setting range Notes
33.2) 24h time format The setting switches between the two time
formats of 24h/12h(AM/PM).
24h display
12h display
(AM/PM)
-
33.3) Set clock Time setting:
► Select the hour or minute range with your
finger.
► The left arrow field reduces the setting.
► The right arrow field increases the set-
ting.
24h:
00:00-23:59
12h:
00:00 AM-
11:59 PM
The display changes ac-
cording to the time format
selected in the "24h time
format" parameter.
33.4) Set date Date setting:
► Activate the month, day or year with your
finger.
► Adjust activated value using the arrow
fields.
► The left arrow field reduces the setting.
► The right arrow field increases the set-
ting.
--
33.5) Time zones Selection list of the various time zones wor-
ldwide.
The selection of a time zone allows for auto-
matic switching between daylight savings
time/standard time and vice versa.
All available va-
lid time zones
worldwide
"Coordinated Universal Ti-
me" (UTC) corresponds to
"Central European Time"
(CET) by adding an hour
for standard time. Or
2 hours during daylight sa-
vings time.
To Next Page
Loading...
Need help?
General
