24
www.seuservice.com
When moving the machine, be sure to unplug the power plug. Moving the
machine with the plug as is inserted can damage the power cord, and cause
fire and electric shock hazards.
When moving the machine on the floor, retract the Adjusters and ensure that
Casters make contact with the floor. During transportation, pay careful
attention so that Casters do not tread power cords and earth wires. Damaging
the power cords can cause electric shock and short circuit hazards.
When moving the machine, do not push the cabinet from the left/right
direction. Pushing the cabinet from the left/right direction can cause the
cabinet to fall down, resulting in injury and or parts damage.
7.
PRECAUTIONS TO BE HEEDED WHEN MOVING THE MACHINE
STOP
IMPORTANT!
When transporting the product in places with steps, disassemble into each unit
before transporting. Inclining the product in an as is assembled condition or
placing the cabinet in places with steps can damage the unit's joining portions.
Do not push glass parts (CRT, etc.) or plastic parts. Failure to observe this may
damage parts and cause injury due to an accident or fragments resulting from
damage.
When transporting the product in places with steps or step-
like differences in grade, disassemble into each unit before
transporting.
FIG. 7 a
To Next Page
Loading...
Need help?
General
