PRECAUTIONS REGARDING INSTALLATION LOCATION
5
2
2-1 LIMITATIONS OF USAGE
● Be sure to check the Electrical Specifications. Ensure that this product is com-
patible with the location’s power supply, voltage, and frequency requirements.
A plate describing Electrical Specifications is attached to the product. Non-
compliance with the Electrical Specifications can cause a fire and electric
shock.
● This product requires a breaker and earth mechanism as part of the location
facilities. Using the product without these can cause a fire and electric shock.
● Ensure that the indoor wiring for the power supply is rated at 15 A or higher (AC
single phase 100 V ~ 120 V area), and 7 A or higher (AC 220 V ~ 240 V area).
Non-compliance with the Electrical Specifications can cause a fire and electric
shock.
● Be sure to use an independent power supply equipped with an earth leakage
breaker. Using a power supply without an earth leakage breaker can cause an
outbreak of fire if a power surge occurs.
● Putting many loads on one electrical outlet can cause generation of heat and
a fire resulting from overload.
● When using an extension cord, ensure that the cord is rated at 15 A or higher (AC
100 V ~ 120 V area) and 7 A or higher (AC 220 V ~ 240 V area). Using a cord
rated lower than the specified rating can cause a fire and electric shock.
Electricity Consumption:
RATED 2.5 @ 230VAC-240VAC
To Next Page
Loading...
Need help?
General
