PROJECTOR
65
10
ADJUSTING ON-SCREEN CONTRAST
10.3
● Although the on-screen picture quality has been adjusted at the time of
shipment from the factory, the onscreen contrast can be readjusted if desired.
When the Game Board is replaced, readjustment may be necessary. Changing
the CONTRAST causes the light and shade of the on-screen images to be
changed..
• When discontinuing the adjustment, choose EXIT from the menu at the stage of procedure 2 and press the SET
button.
• To continue adjusting other menu items, repeat procedure 2-4.
• Unless the adjustment data is stored, the data in the adjusted status will be erased at the time the power is turned
off and the pre-adjustment status will remain when the power is turned on next time.
To Next Page
Loading...
Need help?
General
