59
MONITOR (LCD DISPLAY)
13
MONITOR (32”LCD DISPLAY, CHILIN, ST-HB32A2X)
13
Responding to breakdown or abnormality
● If smoke or a strange odor appears, immediately unplug the power cable from the power source. Continuing to use
the product may cause a fi re or an electric shock. Ensure that smoke is no longer emitted, and contact the point of
purchase.
● If nothing displays on the screen, immediately unplug the power cable from the power source. Continuing to use the
product may cause a fi re or an electric shock. Contact the point of purchase and request an inspection.
● If water or a foreign object enters the monitor’s interior, immediately unplug the power cable from the power source.
Continuing to use the product may cause a fi re or an electric shock. Contact the point of purchase and request an
inspection.
● If the monitor is dropped or the cabinet is damaged, immediately unplug the power cable from the power source.
Continuing to use the product may cause a fi re or an electric shock. Contact the point of purchase and request an
inspection.
During operation
● Do not repair, reconstruct, or disassemble the monitor. The monitor’s interior contains high voltage parts. A fi re or an
electric shock could result. For inspections, adjustments, and repair of the monitor’s interior, request work from the
point of purchase.
● Do not insert foreign objects. If metal objects or fl ammable materials such as paper are inserted into the interior
through ventilation openings or other apertures, an electric shock could result.
● In the event of a thunder storm, do not touch the product or the power cable. An electric shock could result.
● Make sure to perform appropriate adjustments. Do not operate the product when the screen is fl ickering, distorted, or
experiencing other abnormalities. Images from an improperly adjusted screen could cause players and other cus-
tomers to experience dizziness, headaches, and other ailments.
13-1 SAFETY PRECAUTIONS WHEN HANDLING THE MONITOR
Clean the screen surface once a week.
13-2 CLEANING THE SCREEN SURFACE
● Use a soft, dry cloth (fl annel-type) to wipe away dirt. Do not use materials such as coarse mesh gauze.
● Alcohol (ethanol) is the recommended solvent for removing dirt. When using a cleaning agent, follow the precau-
tions below.
- Dilute neutral cleaning agents for home use with water. Soak a soft cloth in the solution, and wring it thoroughly
before wiping the screen.
- Do not use abrasive cleaning agents or powders, or cleaning agents containing bleach.
- Do not use alkaline cleaning agents such as glass cleaners, or solvents such as thinners.
● Do not scrub or scratch the screen surface with abrasive materials such as brushes or scrub brushes.
Controls – Adjustment Procedures
This section explains basic control procedures for making adjustments using the remote controller.
13-3 ADJUSTMENT METHOD
All adjustment values are set accurately at the time of shipping from the factory. Do not
readjust these values needlessly or apply adjustments not specifi ed in this manual. The display
may not appear properly if the values are incorrect.
To Next Page
Loading...
Need help?
General
