Name: Sharp LC-32LB370U
Brand: Sharp
Rating: 4 (1 reviews)

To Next Page

To Previous Page

LC-32LB370U/LC-50LB370U Sharp 32"/50" LED TV

Connecting a cable or satellite box

Many cable or satellite TV boxes have more than one connection type. To get the best video, you should use the best

connection type available. For more information, see “What connection should I use?” on page 13.

HDMI (best)

1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.

2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.

3 Connect an HDMI cable (not provided) to one of the HDMI jacks on the side of your TV and to the HDMI OUT jack on the

cable or satellite box.

4 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.

5 Press INPUT to open the INPUT SOURCE list.

6 Press

to highlight HDMI 1, HDMI 2, or HDMI 3, then press ENTER.

Note

An HDMI cable carries both audio and video. You do not need to use any

audio cables.

HDMI cable

Cable or

satellite box

Side of TV

HDMI cable

connector

HDMI jack

On your TV

Questions and Answers:

Need help?

Do you have a question about the Sharp LC-32LB370U and is the answer not in the manual?

Sharp LC-32LB370U Specifications

General

Comb filter	3D
Screen shape	Flat
Response time	- ms
Display diagonal	31.5 \
Display brightness	- cd/m²
LED backlighting type	Direct-LED
Supported video modes	1080p
Contrast ratio (dynamic)	2000000:1
Screen format adjustments	16:9
Supported graphics resolutions	1920 x 1080 (HD 1080)
Motion interpolation technology	-
3D type	Active
Tuner type	Analog & digital
Number of tuners	2 tuner(s)
Analog signal format system	NTSC
Digital signal format system	ATSC
Audio system	DTS Sound
Audio decoders	DTS
RMS rated power	5 W
Number of speakers	2
HDMI ports quantity	3
DVI-D ports quantity	0
USB 2.0 ports quantity	1
Consumer Electronics Control (CEC)	Aquos Link
On Screen Display (OSD) languages	ENG, ESP, FRE
Product color	Black
Panel mounting interface	100 x 100 mm
AC input voltage	120 V
AC input frequency	60 Hz
Power consumption (standby)	1 W
Power consumption (typical)	47 W

Weight and Dimensions