46
LC-32LB370U/LC-50LB370U Sharp 32"/50" LED TV
Setting the power on picture mode
You can set the picture mode your TV uses when you turn it on.
1 Press MENU.
2 Press
W
or
X
to highlight Help,
then press ENTER.
3 Press
S
or
T
to highlight Power on in Dynamic Mode,
then press ENTER or
X
to access the option.
4 Press
W
or
X
to select On (when you turn on your TV, it will
be in Dynamic picture mode) or Off (when you turn on
your TV, it will be in the picture mode it was in before you
turned it off ), then press ENTER.
5 Press MENU to return to the previous menu, or press EXIT
to close the menu.
Adjusting the sound
Adjusting sound settings
You can adjust sound settings to improve the sound quality.
You also can reset all sound settings to the factory default.
1 Press MENU,
2 Press
W
or
X
to highlight
Sound, then press ENTER.
3 Press
S
or
T
to highlight an
option, then press ENTER or
X
to access the option. You can
select:
• Sound Mode—Selects the
sound mode. You can select:
• Standard—Balances treble
and bass. This setting is
good for watching standard
TV broadcasts.
• Movie—Enhances treble
and bass for a rich sound
experience. This setting is
good for watching DVDs,
Blu-ray Discs, and HDTV.
• Music—Preserves the
original sound. This setting
is good for listening to music.
• Voice—Enhances vocals for TV audio. This setting is
good for watching news broadcasts.
• User—Lets you manually adjust sound settings.
• Balance—Adjusts the balance between the left and right
audio channels.
• Bass—Adjusts the low sounds.
• Treble—Adjusts the high sounds.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
