Sharp LC-32LB370U User Manual

36
LC-32LB370U/LC-50LB370U Sharp 32"/50" LED TV
Understanding the
basics
Turning your TV on or off
1 Make sure that the power cord is connected to a power
outlet. See “Connecting power” on page 31.
2 Press POWER to turn on your TV. The power indicator
turns blue.
3 Press POWER again to turn off your TV. Your TV enters
standby mode, and the power indicator turns red.
Selecting the video input source
1 Turn on your TV, then press INPUT.
2 Press
S or T to select a video input source, then press
ENTER.
On-screen menu overview
Accessing the menus
1 Press MENU.
2 Press
W or X to highlight a menu icon, then press ENTER.
Picture menu (TV mode)
Sound menu (TV mode)
Warning
When your TV is in standby mode, it is still
receiving power. To completely disconnect
power, unplug the power cord.
Note
If your TV does not receive an input signal
for several minutes, it automatically goes
into standby mode.
Note
The INPUT SOURCE list displays
Component when a component video
device is connected and turned on or
displays AV when an AV device is
connected and turned on.
Notes
• Depending on the signal source selected, you may
see different options on your screen.
• Menu items that are not selectable are grayed out.

Sharp LC-32LB370U Specifications

General

Comb filter	3D
Screen shape	Flat
Response time	- ms
Display diagonal	31.5 \
Display brightness	- cd/m²
LED backlighting type	Direct-LED
Supported video modes	1080p
Contrast ratio (dynamic)	2000000:1
Screen format adjustments	16:9
Supported graphics resolutions	1920 x 1080 (HD 1080)
Motion interpolation technology	-
3D type	Active
Tuner type	Analog & digital
Number of tuners	2 tuner(s)
Analog signal format system	NTSC
Digital signal format system	ATSC
Audio system	DTS Sound
Audio decoders	DTS
RMS rated power	5 W
Number of speakers	2
HDMI ports quantity	3
DVI-D ports quantity	0
USB 2.0 ports quantity	1
Consumer Electronics Control (CEC)	Aquos Link
On Screen Display (OSD) languages	ENG, ESP, FRE
Product color	Black
Panel mounting interface	100 x 100 mm
AC input voltage	120 V
AC input frequency	60 Hz
Power consumption (standby)	1 W
Power consumption (typical)	47 W

Weight and Dimensions

Depth (with stand)	184 mm
Height (with stand)	464 mm
Weight (with stand)	5100 g
Depth (without stand)	64 mm
Width (without stand)	727 mm
Height (without stand)	437 mm
Weight (without stand)	4900 g