Sharp LC-32LB370U User Manual

22
LC-32LB370U/LC-50LB370U Sharp 32"/50" LED TV
Connecting a game console
HDMI (best)
1 Make sure that your TV’s power cord is unplugged and the game console is turned off.
2 Connect an HDMI cable (not provided) to one of the HDMI jacks on the side of your TV and to the HDMI OUT jack on the
game console.
3 Plug your TV’s power cord into a power outlet, then turn on your TV.
4 Turn on the game console, then set it to the correct output mode. For more information, see the documentation that
came with the console.
5 Press INPUT to open the INPUT SOURCE list.
6 Press
S or T to highlight HDMI 1, HDMI 2, or HDMI 3, then press ENTER.
Note
An HDMI cable carries both audio and video. You do not need to use any
audio cables.
HDMI cable
connector
HDMI jack
Side of TV
HDMI cable
Game
console
On your TV

Sharp LC-32LB370U Specifications

General

Comb filter	3D
Screen shape	Flat
Response time	- ms
Display diagonal	31.5 \
Display brightness	- cd/m²
LED backlighting type	Direct-LED
Supported video modes	1080p
Contrast ratio (dynamic)	2000000:1
Screen format adjustments	16:9
Supported graphics resolutions	1920 x 1080 (HD 1080)
Motion interpolation technology	-
3D type	Active
Tuner type	Analog & digital
Number of tuners	2 tuner(s)
Analog signal format system	NTSC
Digital signal format system	ATSC
Audio system	DTS Sound
Audio decoders	DTS
RMS rated power	5 W
Number of speakers	2
HDMI ports quantity	3
DVI-D ports quantity	0
USB 2.0 ports quantity	1
Consumer Electronics Control (CEC)	Aquos Link
On Screen Display (OSD) languages	ENG, ESP, FRE
Product color	Black
Panel mounting interface	100 x 100 mm
AC input voltage	120 V
AC input frequency	60 Hz
Power consumption (standby)	1 W
Power consumption (typical)	47 W

Weight and Dimensions

Depth (with stand)	184 mm
Height (with stand)	464 mm
Weight (with stand)	5100 g
Depth (without stand)	64 mm
Width (without stand)	727 mm
Height (without stand)	437 mm
Weight (without stand)	4900 g