Name: Sharp LC-32LB370U
Brand: Sharp
Rating: 4 (1 reviews)

To Next Page

To Previous Page

LC-32LB370U/LC-50LB370U Sharp 32"/50" LED TV

Coaxial (good)

1 Make sure that your TV’s power cord is unplugged and all connected equipment is turned off.

2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.

3 Connect a coaxial cable (not provided) to the ANT / CABLE jack on the back of your TV and to the coaxial out jack on the

cable or satellite box.

4 Plug your TV’s power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.

5 Press INPUT to open the INPUT SOURCE list.

6 Press

to highlight TV, then press ENTER.

7 If you cannot tune to channels you know exist, scan for channels. See “Automatically scanning for channels” on page 48.

Notes

• Use a coaxial cable to eliminate interference and noise from radio

waves.

• Do not bundle the coaxial cable with the power cord or other cables.

Cable or

satellite box

Back of TV

Coaxial cable

connector

ANT / CABLE

jack

On your TV

Coaxial cable

Questions and Answers:

Need help?

Do you have a question about the Sharp LC-32LB370U and is the answer not in the manual?

Sharp LC-32LB370U Specifications

General

Comb filter	3D
Screen shape	Flat
Response time	- ms
Display diagonal	31.5 \
Display brightness	- cd/m²
LED backlighting type	Direct-LED
Supported video modes	1080p
Contrast ratio (dynamic)	2000000:1
Screen format adjustments	16:9
Supported graphics resolutions	1920 x 1080 (HD 1080)
Motion interpolation technology	-
3D type	Active
Tuner type	Analog & digital
Number of tuners	2 tuner(s)
Analog signal format system	NTSC
Digital signal format system	ATSC
Audio system	DTS Sound
Audio decoders	DTS
RMS rated power	5 W
Number of speakers	2
HDMI ports quantity	3
DVI-D ports quantity	0
USB 2.0 ports quantity	1
Consumer Electronics Control (CEC)	Aquos Link
On Screen Display (OSD) languages	ENG, ESP, FRE
Product color	Black
Panel mounting interface	100 x 100 mm
AC input voltage	120 V
AC input frequency	60 Hz
Power consumption (standby)	1 W
Power consumption (typical)	47 W

Weight and Dimensions