Operating Instructions
LMS5xx
Annex
8013796/ZM63/2017-05-09 © SICK AG · Germany · All rights reserved · Subject to change without notice 115
Chapter 11
11 Annex
11.1 Ordering information
Ordering information about the LMS5xx and its optional accessories is available from the
following web product page:
http://www.sick.com/lms5xx
11.1.1 Consumables
11.2 EU declaration of conformity
The EU declaration of conformity of the LMS5xx with the listed available device variants
(according to the type code) and the fullfiled standards is availabe in PDF format from the
following product web page:
http://www.sick.com/lms5xx
11.3 Glossary
Download
Transmission of the parameter set that has been modified offline in the SOPAS ET configu-
ration software from the PC to the LMS5xx. SOPAS ET transmits either always a complete
copy to the memory (RAM) of the LMS5xx (menu C
OMMUNICATION, DOWNLOAD ALL PARAMETERS
TO DEVICE) or only the parameter that has just been edited (menu COMMUNICATION, DOWNLOAD
M
ODIFIED PARAMETERS TO DEVICE). With the menu LMS, PARAMETER, SAVE PERMANENT, the
parameter set is saved permanently in the EEPROM of the LMS5xx.
Parameter set
Data set that is used to initialize and activate the functions implemented in the LMS5xx. Is
transmitted from the LMS5xx to SOPAS ET and in the reverse direction using U
PLOAD or
D
OWNLOAD respectively.
Remission
Remission is the quality of reflection at a surface. The basis is the Kodak standard, known
worldwide in, among other areas, photography.
Scan
A scan contains all measured values. These values are in relation with the sensor‘s
parameters such as the scanning angle, start/stop angle etc.
SOPAS ET
Configuration software, used for the offline configuration (adaptation to the read situation
on-site) and the online operation of the LMS5xx in dialog mode.
Part number Part Description
4003353 Lens cloth Special cloth for proper cleaning of the window
5600006 Plastic detergent Antistatic, mild detergent solution
Tab. 44: Consumables
To Next Page
Loading...
Need help?
General
