Operating Instructions
LMS5xx
For your safety
8013796/ZM63/2017-05-09 © SICK AG · Germany · All rights reserved · Subject to change without notice 9
Chapter 2
2 For your safety
This chapter deals with your own safety and the safety of the equipment operators.
Please read this chapter carefully before working with the LMS5xx.
2.1 Correct use
The LMS5xx is a non-contact optical distance measurement sensor for stand-alone or
network operation, based on a 2D laser scanner. It is suitable for applications in which
precise, electro-sensitive measurements of contours and surroundings are required. It is
also possible to create systems, for instance, for collision protection, for building
surveillance or for access monitoring
It must be initialized only by qualified personnel and only in industrial environments.
Important The LMS5xx is only allowed to be operated in the ambient temperature range allowed (see
section 10.1 “Data sheet LMS5xx laser measurement sensor” on page 101).
2.2 Incorrect use
The LMS5xx does not constitute a safety component according to the EC Machinery
Directive (2006/42/EC).
The LMS5xx is not a device for the protection of people in the context of the related
safety standards for machinery.
The LMS5xx must not be used in explosion hazard areas.
Any other use that is not described as correct use is prohibited.
The use of accessories not specifically approved by SICK is at own risk.
2.3 IP technology
SICK uses standard IP technology in its products. The emphasis is placed on availability of
products and services.
SICK always assumes the following prerequisites:
The customer will ensured the integrity and confidentiality of the data and rights
affected by the use of the aforementioned products.
In all cases, appropriate security measures, such as network separation, firewalls, virus
protection, and patch management, is be taken by the customer on the basis of the
situation in question.
2.4 Limitation of liability
Applicable standards and regulations, the latest state of technological development and
many years of knowledge and experience have all been taken into account when
assembling the data and information contained in these operating instructions. The
manufacturer accepts no liability for damage caused by:
Failing to observe the operating instructions
Incorrect use of the device
To Next Page
Loading...
Need help?
General
