SICK LMS5 Series User Manual

Operating Instructions
LMS5xx
Maintenance
8013796/ZM63/2017-05-09 © SICK AG · Germany · All rights reserved · Subject to change without notice 95
Chapter 8
If the replacement device is going on to be used with a system connector that is different
from the previous one, the existing configuration must be transferred to the sensor using
SOPAS. In this case, acceptance by a qualified person may be required (depending on the
system; e.g., Security).
8.2.4 Returns
 Only return devices after consultation with the SICK Support.
Important To enable efficient processing and allow us to determine the cause quickly, please include
the following when making a return:
 Details of a contact person
 A description of the application
 Adescription of the fault that occurred
8.3 Decommissioning
8.3.1 Disposal
The design of the LMS5xx allows for its separation as recyclable secondary raw materials
and hazardous waste (electronic scrap).
Important Danger to the environment due to improper disposal of the LMS5xx:
Disposing of LMS5xx improperly may cause damage to the environment.
 Always observe the valid national regulations on environmental protection.
 Following correct disassembly, pass on any commercially viable disassembled
components for recycling. Separate materials as far as possible by type.
SICK AG is not currently able to take back devices that can no longer be used.

SICK LMS5 Series Specifications

General

Brand	SICK
Model	LMS5 Series
Category	Accessories
Language	English