Mounting, installation
B
Stor
more than 12
found to have lost some of its oil content or is contaminated (ingress of condensation
ency of the grease), the grease must be replaced.
ntact bearings
r the expected bearing lifetime.
Mounting, installation
earing lifetime
age time
Prolonged storage periods reduce the useful life of the bearing grease. If stored for
months, the condition of the grease must be checked. If the grease is
leads to changes in the consist
Rolling-co
The shafts must be turned once a year to prevent marks as a result of them resting in
the same position for a long time. The rolling-contact bearings should be renewed if
the time from delivery to start-up of the machine is longer than 4 years. The older the
r ase used, the shorteg e
Safety instructions
CAUTION
T
he housing parts of electrical machines can become very hot!
CAUTION
Before commissioning can be carried out, the customer must check the machine's
direction of rotation using appropriate methods (such as decoupling it from the
driven machine).
CAUTION
It must be ensured that parts which are sensitive to temperature changes (cables
etc.) do not rest against the housing of the machine.
NOTICE
Please note the technical data on the rating plates on the machine enclosure.
Electromagnetic compatibility
NOTICE
If the torque levels are very unequal (e.g. when a reciprocating compressor is being
onics can driven), a non-sinusoidal machine current will be induced whose harm
have an impermissible effect on the supply system and cause impermissible
interference emissions as a result.
Standard machines_Operating_Instructions_Compact
56100000002001 EN, 01/2010
5
To Next Page
Loading...
Need help?
General