Step by Step
Making calls with multiple lines
116
Direct station selection keys
Apart from line keys, administrator can also configure
direct station selection (DSS) keys. You can use a DSS
key to call an internal station directly, pick up calls for
this station or forward calls directly to it.
Calling a station directly
You cannot use DSS if the user is on another call (flash-
ing LED).
Calling from the idle menu
S Press the relevant DSS key.
or
h Press the key shown to open the Overview tab
Æ page 30.
Select and confirm the DSS line. The key lights up and
a connection is established.
Consultation with the DSS station
Prerequisite: You are conducting a call and administra-
tor have configured the DSS key for consultation.
S Press the relevant DSS key for the consultation. The key
lights up and a connection is established. If the called
party answers, you can toggle, transfer the first call or
initiate a conference.
DSS call 1
The administrator can configure the DSS key so
that the connection is also established when the
DSS station has activated do-not-disturb or call
forwarding.
If administrator have configured transfer instead
of consultation, you can only transfer the current
call to the DSS station.
To Next Page
Loading...
Need help?
General