Getting to know your OpenStage phone
38
Network information
Information about the IP address or name which was assigned to the
phone in the network and therefore the HTML address of the web inter-
face.
V
View information on the phone Æ page 174
Reset phone
V
Personal settings made via the telephone menu or the web interface can
be reset to factory settings.Æ page 175
Administration
You can access the administration area via the "Admin" function and by en-
tering the administration password.
Refer to the administration manual supplied with your phone for more de-
tailed information on this topic.
Control and monitoring function
A control or monitoring function can be activated on your phone for service
purposes by remote maintenance.
Control function
Service personnel have the option to activate and deactivate features of
the phone via remote maintenance. During maintenance the handset, mi-
crophone, loudspeaker and headset are deactivated. You are additionally
informed on the display that the control function is active.
Monitoring function
In order to detect malfunctioning of a phone for example, the service per-
sonnel install a monitoring function. You can use your phone as normal dur-
ing monitoring. However you will first be informed about the operation
with a message on the display and prompted to allow monitoring.
If service personnel have activated a function on your phone, which contin-
uously transmits operating data to a server, you will see the flashing
icon in the upper display line.
Contact your service personnel or refer to the OpenStage Adminis-
tration Manual for more on the network information values listed
here.
To Next Page
Loading...
Need help?
General