Configuration and operation
4.15 STEP 7 configuration of individual parameters
CP 1243-7 LTE
Operating Instructions, 01/2015, C79000-G8976-C381-01
75
●
PLC tag (data type UInt) for the status of the connection for the data service in the mobile
wireless network.
●
Date of last successful logon to network
PLC tag (data type DTL) for the date on which the CP last logged in to the mobile
wireless network.
●
Date of last unsuccessful logon to network
PLC tag (data type DTL) for the date on which the CP was last unable to log in to the
mobile wireless network.
●
Date of last successful logon to TCSB
PLC tag (data type DTL) for the date on which the CP last logged in to the telecontrol
server.
●
Date of last unsuccessful logon to TCSB
PLC tag (data type DTL) for the date on which the CP was last unable to log in to the
telecontrol server.
E-mail configuration
Configuring e-mails in STEP 7
In the "E-mail configuration" entry, you configure the protocol to be used and the data for
access to the e-mail server in STEP 7.
In the message editor ("Messages" entry in STEP 7), you configure the individual e-mails,
see section Messages (Page 86).
With the default setting of the SMTP port 25, the CP transfers unencrypted e-mails.
If your e-mail service provider only supports encrypted transfer, use one of the following
options:
● Port no. 587
By using STARTTLS, the CP sends encrypted e-mails to the SMTP server of your e-mail
service provider.
Recommendation: If your e-mail provider offers both options (STARTTLS / SSL/TLS), you
should use STARTTLS with port 587.
● Port no. 465
By using SSL/TLS (SMTPS), the CP sends encrypted e-mails to the SMTP server of your
e-mail service provider.
Ask your e.mail service provider which option is supported.
To Next Page
Loading...
Need help?
General
