5.2 Diagnostics options
You can diagnose errors in the WBM under "Information > Redundancy > VRRPv3
Statistics".
Figure 5-2
The following errors will be displayed:
• VRID error
Displays how many VRRPv3 packets were received which contain an
unsupported VRID.
• Version error
Displays how many VRRPv3 packets were received which contain an invalid
version number.
• Checksum error
Displays how many VRRPv3 packets were received which contain an invalid
checksum.
• Advertisement interval error
Displays how many faulty VRRPv3 packets were received whose interval does
not match the locally set value.
• IP TTL error
Displays how many faulty VRRPv3 packets were received whose TTL (Time to
live) value in the IP header is not correct.
• Invalid type
Displays how many faulty VRRPv3 packets were received whose value in the
"Type" field of the IP header is invalid.
• Address list error
Displays how many faulty VRRPv3 packets were received whose address list
does not match the local configuration list.
• Telegram length error
Displays how many faulty VRRPv3 packets were received whose length is not
correct.
To Next Page
Loading...
Need help?
General