78/80
Siemens Building Technologies Commissioning Guide CM1G5192en
HVAC Products 11 Appendix 26.02.2003
11 Appendix
11.1 Applicable standards
European low-voltage guideline
The SED2 product range corresponds to the requirements of the low-voltage
guideline 73/23/EEC, supplemented by guideline 98/68/EEC. The devices have
been certified to the following standards:
EN 60146-1-1 Semiconductor inverters – General requirements and line com-
mutated inverters
EN 60204-1 Safety of machinery – Electrical equipment of machines
European guideline for machinery
This guideline does not apply to the SED2 VSD product series. The products
were tested comprehensively and evaluated for adherence to important guide-
lines pertaining to health and safety in a typical application. A declaration of
conformity will be provided on request.
European EMC guideline
If installed according to the recommendations issued in this Manual, the SED2
satisfies all EMC guideline requirements as defined in the EMC Product Stan-
dard for Power Drive Systems EN 61800-3.
Underwriters Laboratories
Frequency inverter devices 5B33 approved by UL and CUL for use in pollution
class 2 environments.
ISO 9001
Siemens SBT applies a quality management system in compliance with
ISO 9001.
To Next Page
Loading...
Need help?
General