9
Siemens Building Technologies / HVAC Products CE1B3131x2-en 74 319 0346 0 a 19.11.2004
Do you want to heat according to the heating program?
In room operating mode , the controller operates
according to the selected heating program.
Heating program
The heating program contains the start time and the
associated room operating mode (room setpoint) for all
phases of the 24-hour heating program. The heating
program has been entered for you; if you wish, you can
change the entries made (
page 10) made to satisfy
your personal needs.
If your plant comprises 2 heating circuits, you can
choose the heating program for both heating circuits
separately (Path: … > Heating circuit 2 >… ).
Example of a heating program:
Tuesday
From 06:00 Comf
From 06:00: Comfort mode
From 11:30: Precomfort mode
From 12:30: Comfort mode
From 19:00: Precomfort mode
From 21:00: Economy mode
Please note that the heating program does not contain switching times but periods of time for the required temperature
levels. The switching times are calculated by the controller’s optimization function!
To Next Page
Loading...
Need help?
General
