30
Siemens Building Technologies Technologies / HVAC Products CE1B3131x2-en 74 319 0346 0 a 19.11.2004
Main menu boiler sequence manager
Menu Boiler sequence optg mode
• Preselection:
Auto = automatic plant operation (normal situation)
Release DHW = boilers will only be released for DHW
heating
Off = all boilers off; frost protection is ensured
• State:
On = heat generation on
Off = heat generation off
• Cause:
Here, the reason for the state of the boiler sequence is
given.
Menu Inputs / setpoints
Displayed are the values acquired by the inputs and the
associated setpoints and limit values.
Menu Outputs
Displayed are for each output the state and thus the
operating state (on/off, open/closed) of the controlled
plant component. If a plant component is not present,
there will be no menu item either.
Menu Limitations
The current state of the limitations (Active / Inactive) is
displayed (useful information for the heating engineer).
Path:
Main menu > Boiler sequence manager
To Next Page
Loading...
Need help?
General
