12
Siemens Building Technologies / HVAC Products CE1B3131x2-en 74 319 0346 0 a 19.11.2004
You don’t want to heat according to the heating program
Other room operating modes
If you do not want to heat according to the heating pro-
gram, select one of the following room operating modes
from menu option Preselection:
Comfort Continuously heating to the
Comfort setpoint
Precomfort Continuously heating to the
Precomfort setpoint
Economy Continuously heating to the
Economy setpoint
Protection No heating, unless there is a
risk of frost
Setpoints
The setpoints assigned to the room operating modes use
the same symbols and designations.
Settings:
page 13.
Impact of continuous operation
In continuous operation, demand-dependent control of
the heating (automatic heating limit) and the holidays
and special days entered are inactive!
If your plant comprises 2 heating circuits, you can
choose the heating program for both heating circuits
separately (Path: … > Heating circuit 2 >… ).
Path:
Main menu > Heating circuit … > Room operating mode > Preselection
If you only want to heat temporarily in one of the continuous operating modes,
don’t forget to return to AUTO mode in due time.
To Next Page
Loading...
Need help?
General
