TC35i: Migration from TC35 to TC35i
PRELIMINARY
TC35_TC35i_MIG_01_V01.01 29.1.2003 Page 2 of 34
Document Name: Migration from TC35 to TC35i
Version: V01.01
Date: January, 29, 2003
DocId: TC35_TC35i_MIG_01_V01.01
Status: Preliminary
General notes
Product is deemed accepted by Recipient and is provided without interface to Recipient's products. The
Product constitutes pre-release version and code and may be changed substantially before commercial
release. The Product is provided on an “as is” basis only and may contain deficiencies or inadequacies.
The Product is provided without warranty of any kind, express or implied. To the maximum extent
permitted by applicable law, Siemens further disclaims all warranties, including without limitation any
implied warranties of merchantability, fitness for a particular purpose and non-infringement of third-party
rights. The entire risk arising out of the use or performance of the Product and documentation remains
with Recipient. This Product is not intended for use in life support appliances, devices or systems where
a malfunction of the product can reasonably be expected to result in personal injury. Applications
incorporating the described product must be designed to be in accordance with the technical
specifications provided in these guidelines. Failure to comply with any of the required procedures can
result in malfunctions or serious discrepancies in results. Furthermore, all safety instructions regarding
the use of mobile technical systems, including GSM products, which also apply to cellular phones must
be followed. Siemens AG customers using or selling this product for use in any applications do so at
their own risk and agree to fully indemnify Siemens for any damages resulting from illegal use or resale
.To the maximum extent permitted by applicable law, in no event shall Siemens or its suppliers be liable
for any consequential, incidental, direct, indirect, punitive or other damages whatsoever (including,
without limitation, damages for loss of business profits, business interruption, loss of business
information or data, or other pecuniary loss) arising out the use of or inability to use the Product, even if
Siemens has been advised of the possibility of such damages.
Subject to change without notice at any time.
Copyright notice
Copying of this document and giving it to others and the use or communication of the contents thereof,
are forbidden without express authority. Offenders are liable to the payment of damages. All rights
reserved in the event of grant of a patent or the registration of a utility model or design.
Copyright © Siemens AG 2003
Trademark notice
MS Windows
is a registered trademark of Microsoft Corporation.
To Next Page
Loading...
Need help?
General
