TC35i: Migration from TC35 to TC35i
PRELIMINARY
TC35_TC35i_MIG_01_V01.01 29.1.2003 Page 8 of 34
Table 3-2: General description b)
Features Parameter TC35 TC35i
Supported services: 2400 bps (V.22bis)
4800 bps (V.32)
9600 bps (V.32)
14400 bps (V.34)
2400 bps (V.110)
4800 bps (V.110)
9600 bps (V.110)
14400 bps (V.110)
USSD support: supported
Data
Connection element: non-transparent mode
Fax Supported classes: Group 3: Class 1, Class 2
RF interface: GSC antenna connector onlyExternal
interfaces
Application interface: 40-pin ZIF connector
Baud rate: Fixed range
(300bps...115kbps)
Autobauding
(1.2kbps...115kbps)
Fixed range (300bps...230kbps)
Autobauding (1.2kbps...230kbps)
Local character framing: 8N1 - fixed 7E1, 7O1, 8E1, 8N1, 8O1, 7E2, 7O2,
8E2, 8N2, 8O2; via AT command
Multiplex mode: supported, MUX GSM 07.10
Serial interface
Flow control: RTS/CTS hardware handshake and software XON/XOFF flow control.
Software update via RS232 or SIM interface
3.2 Certification and standards
Both TC35 and TC35i comply to the same directives and standards. For further information,
please consult the HW manual.
To Next Page
Loading...
Need help?
General
