TC35i: Migration from TC35 to TC35i
PRELIMINARY
TC35_TC35i_MIG_01_V01.01 29.1.2003 Page 9 of 34
4 Hardware migration
This chapter contains information regarding the hardware set-up, installation instructions and
physical properties for both modules. Hardware features are listed in comparison tables
related to power supply, RF, audio, SIM and RS232 serial interfaces with functionality
descriptions. All features, except RF, are available through common host application
interface.
4.1 Introduction
TC35i was intended as a "feature-superset" successor to TC35. It is super-slim, single-side
mounted, compact, dual-band GSM OEM module for integration into industrial or mobile
devices.
TC35i incorporates all the TC35 HW features with following additional features:
æ Automatic dial on DTR line activation
æ Autobauding up to 230kbps. Character framing and flow control fully supported
æ Single side mounted
æ SM+ME (25 places)
æ SAT class 3, GSM 11.14
To Next Page
Loading...
Need help?
General
