Recording SCAZ 5.00 A1
30 -English
Macro Mode
This device features a macro function allowing you to focus on very close
subjects. This allows you to position the lens as close as 10 cm (4 inches)
from the subject. Use the navigation button to enable Macro mode. To do
this, move the navigation button multiple times to the right until Macro
mode is enabled.
The Macro mode is indicated by the display icon.
Manual Focus
With this function you can focus the scene yourself. Use the navigation
button to enable Manual focus. To do this, move the navigation button
multiple times to the right until Manual focus is enabled.
Manual focus is indicated by the
display icon. While Manual focus
is enabled, the
icon will appear on the display. You can then use
the zoom swivel button (20) to focus the scene. Tap on the icon to toggle
the zoom swivel button back to zoom adjustment mode. The
icon
will appear on the display. Each tap on these icons will toggle the
operating mode allowing easy selection.
Locking the Auto Focus
While your camcorder is focussing automatically, you can lock the current
focus setting by pressing the navigation button (5). This focus setting will
be kept even if you aim the device at a different subject. The lock will be
disabled when you press the navigation button again.
To Next Page
Loading...
Need help?
General
