Silvercrest SCW 5 A2 User Manual

SilverCrest SCW 5 A2
English - 71
Bike holder
You can use the bike holder to mount the water-resistant case on the bike frame or another
tube. To mount the bike holder, proceed as follows:
 Open the holder by untightening the screws as far as necessary to be able to remove
the screw located on the side of the clip on the bottom piece.
 Rotate the bottom piece aside.
 Place the upper piece on a tube and replace the bottom piece.
 Reinsert the screw into the bottom piece.
 To fix the holder on the tube, tighten the screws.
 Next you can fix the camcorder together with its water-resistant case and the swivel
holder on the bike holder. Please see the "Swivel holder" section on page 69.

Silvercrest SCW 5 A2 Specifications

General

Brand	Silvercrest
Model	SCW 5 A2
Category	Action Cameras
Language	English