13 - 7
13 Engine Removal & Installation
Kawasaki Liquid Cooled V-Twin 20 HP Models
1 1 BELT, PTO (Matched Set of 2 Belts)
2 1 CAPSCREW, Hex Hd, M10-1.5 x 80mm
3 1 LOCKWASHER, 7/16
4 1 WASHER, Hex, 7/16
5 1 FAN, Electric Clutch
6 1 SPACER, Clutch Fan
7 1 ELECTRIC CLUTCH
8 1 SPACER, Clutch
9 1 KEY
10 1 MUFFLER
11 2 CAPSCREW, Hex Hd, M8 - 1.25 x 20mm
12 9 LOCKWASHER, 5/16
13 4 NUT, Hex Flange Lock, M6
14 1 HEAT SHIELD
15 2 CAPSCREW, Hex Hd
16 2 GASKET, Exhaust Manifold
17 1 ENGINE, 20HP Kawasaki
18 6 CLAMP, Hose
19 1 HOSE, Fuel, 60-1/2 Lg (cut to length of 21-3/4)
20 2 CAPSCREW, Hex Hd, Taptite, 1/4-20 x 3/8
21 1 FUEL PUMP
22 1 HOSE, Fuel, 60-1/2 Lg (cut to length of 51)
23 1 FUEL FILTER
24 1 HOSE, Fuel, 60-1/2 Lg (cut to length of 12)
25 2 TIE
26 2 EDGING, Side 12.5
27 2 GROMMET
28 1 SHIELD, RH
29 6 CAPSCREW, Hex Hd, Taptite, 5/16-18 x 3/4
30 2 NUT, PAL, 1/4-20
31 2 EDGING, Top 9
32 1 SHIELD, Upper
33 2 CAPSCREW, Hex Hd, 1/4-20 x 3/4
34 1 DECAL, Radiator
35 1 SCREEN ASSY.
36 1 SEAL, Radiator
37 2 NUT, Whiz Lock 1/4-20
38 1 SHIELD, LH
39 2 CAPSCREW, Hex Hd, 1/4-20 x 1
40 2 WASHER, 1/4
41 1 VOLTAGE REGULATOR
42 1 HOSE, Air Inlet
43 1 HOSE CLAMP
44 4 CAPSCREW, Hex Hd, 8mm x 25
45 1 VALVE, Oil Drain
46 1 HOSE ASSEMBLY, Return
47 1 ROD, Anti Rotation
48 1 CAPSCREW, Hex Hd, 3/8-16 x 1
49 1 SPACER
Engine Group – Liquid Cooled Models
REF NO. QTY. DESCRIPTION
To Next Page
Loading...
Need help?
General
